6 Cool Ways to Lace Your Sneakers

The feeling of picking up a new pair of sneakers from the box and slipping them off is too good to put into words. The shiny trades coupled with the pleasant absence of scuff marks is everything we needed in our lives. Well, that is until we try them on. The striking realization that breaking in the brand new kicks will leave us with a possible layer of heel skin; don’t even get us started on the blisters. Suddenly, the tried and tested worn-in pair don’t seem so bad at all. Adding a fresh shin on the lacing can turn your favorite old pairs into a new set of kicks you’ll love wearing out. Why not give your sneakers a personal touch by going a bit creative on the tying of shoelaces? Check out these cool ways to lace shoes.

Not so surprisingly, the generic process of in-a-side-and-out-the-other with a bow tied at the top of the design isn’t the only way you can put the laces into your sneaks. So, on days you want to be a bit fancy and have a few minutes on hand, try out these cool ways to lace shoes.

You can also check: The Difference Between Running Shoes and Badminton Shoes

Straight bar lacing style - Cool Ways to Lace Your Sneakers

6 Cool Ways to Lace Your Sneakers

If your sneakers have an even number of eyelet pairs, the lacing style of straight bar will work perfectly. For this one, the shoelace needs to cross the shoe and since they loop over an even number of times, they meet in the center and can be tied together.

We love this pattern for its overall clean and simple appeal.

How to Tie:

  1. With its ends down, put the shoelace inside the first eyelets.
  2. Make sure the ends are even by pulling both ends.
  3. Take the left end and run it straight up on the inner part before bringing it straight over the outside.
  4. Run both ends directly up the inside, skipping one eyelet each and resurfacing higher by two eyelets.
  5. Repeat steps 3 and 4 till you reach the final eyelets.

Ladder lacing style - Cool Ways to Lace Your Sneakers

6 Cool Ways to Lace Your Sneakers

The ladder lacing style is significantly harder to do than the first one, but this pattern is amongst the best techniques to get support and stability from your sneakers. It stays tightly in place, adding a touch of creativity to any sneaker you’re wearing. In essence, this is definitely a cool way to lace shoes. Especially for multiple eyelets high boots (like hiking boots), this can be your go-to look.

How to Tie:

  1. With its ends down, put the shoelace inside the first eyelets.
  2. Make sure the ends are even by pulling both ends.
  3. Run the ends up the sides straightly and through the higher (next) set of eyelets.
  4. Now, run the ends directly across – below the vertical lace sections of the opposite part.
  5. Continue this – running straight through and up the next higher eyelets set.
  6. Repeat steps 4 and 5 till you reach the final eyelets.

One handed lacing style - Cool Ways to Lace Your Sneakers

6 Cool Ways to Lace Your Sneakers

If the eyelets are small or the shoelaces are fat, the one handed lacing concept is a cool way to lace shoes. In comparison to the ladder lacing style just mentioned, this is much easier. It’s also looser than some other lacing styles.

How to Tie:

  1. At the top corner, tie a stopper-knot with an end of one shoelace.
  2. Bring the un-knotted end through the inside of the other eyelet and pull till the knot sits snugly on the eyelet.
  3. Move the shoelaces in a zigzag pattern across the eyelets, taking it till the bottom of the shoe.
  4. Tuck the loose corner inside the lacing to prevent tripping on it.

Cross lacing style

6 Cool Ways to Lace Your Sneakers

The cross lacing style is just fun to do and looks good with a ton of outfits.

How to Tie:

  1. With its ends up, put the shoelace inside the first eyelets.
  2. Cross the edges on the outside and pass them through the top eyelets set.
  3. Begin tying them as usual (from top to the shoe’s bottom) on top of the pass.
  4. Tuck the loose corner inside the lacing to prevent tripping on it.

Lattice lacing style

When you want to go all out with a decorative look, the lattice lacing style will fit the bill.

How to Tie:

  1. With its ends up, put the shoelace inside the first eyelets.
  2. Cross the edges on the outside and cross them through the eyelets set three rows higher up.
  3. Pass both ends straightly on the inside and take them out through the eyelets set higher than that.
  4. Pass the end on the outside and bring them through the eyelets set three rows under the shoe.
  5. Take both ends and run them right up on the inside and out, passing the next higher eyelets straight.

Extra tip: If your shoes have an extra eyelet straight, you can choose to skin the middle parts and pass your shoelaces the eyelets set four rows higher up and down in place of three.

Ukrainian lacing

Thanks to the interesting starting knot and permanently-anchored loose edges, the Ukrainian lacing style is style and convenience at its finest.

How to Tie:

  1. Run one end of the shoelace straight across the inside and out through the bottom set of eyelets.
  2. Cross the corners, tucking under the sides and bringing them out through the next higher eyelets set. Continue till you get to the 2nd-from-top set.
  3. Tie a Starting Knot and pass the ends through the top set of eyelets, leaving one extra-long loose slack at each end. These loops are used to tighten the knot and pull the lacing tighter, so keep about 4”.
  4. Tie a permanent Reef Knot (a standard shoelace knot without loops) with the ends at the top-middle.

Bottom Line

Attempting a new technique to lace your shoes is great way to make your kicks out in a crowd. After all, who doesn’t want to look a more distinctive? Practice cool ways to lace shoes to elevate your style.

Leave a Comment